View source for PE1CKK Az-El rotator

{{Template:Rotator
|Rotator-Name=PE1CKK Az-El rotator
|image=
|type= Az/El
|cost=
|status=
|latest-release= 
|latest-release-name= 
|source-repo= 
|documentation=[http://www.hybridpretender.nl/az-el.html Az-El rotator]
}}

===Introduction===
A fully 3D printed Az-El system, designed by PE1CKK.

* Link: http://www.hybridpretender.nl/az-el.html
* [https://community.libre.space/t/az-el-printed-rotor-from-pa3axa-and-pe1ckk/12827/5 Forum thread]

===Specification===
{| class="wikitable"
| colspan="2" align="center" |'''PE1CKK Az-El rotator'''
|-
|Plastic Parts||20
|-
|Non Printed Parts||
|-
|Cost||
|-
|Controller Electronics||
|-
|Type||AZ/EL
|-
|Motors||2x DC Motors
|-
|Speed (deg/sec)||
|-
|Torque (Nm)||
|-
|Brake Torque (Nm)||
|-
|Dimensions (mm)||
|-
|Weight (kg)||
|}

===Sourcing & parts===
[https://pad.tchncs.de/sheet/#/2/sheet/view/AfIfw2d1qwsnxny3PwVpOHarpkMlnl2fUeAyfzKnC3A/ Bill-of-materials (collaborative sheet)]<!-- editable link: https://pad.tchncs.de/sheet/#/2/sheet/edit/f9IAOteizSAx2Q5gZtsA5vyh/ -->

====3D-printed Parts====
{| class="wikitable"
|'''Part'''
|'''Model Filename'''
|'''Quantity'''
|-
|Bottom baseplate
|baseplate_2
|1
|-
|Vertical base
|vertical base
|1
|-
|Big gear half
|tandwiel_groot
|4
|-
|Motor gear
|tandwiel_motor
|2
|-
|Resistor gear
|tandwiel_potmeter
|2
|-
|Gear clamp
|lagerklem
|2
|-
|Standoff ring
|bus
|8
|}
<br />

====Other Parts====
{| class="wikitable"
|'''Part'''
|'''Quantity'''
|'''Distributor'''
|'''Price (each)'''
|'''Remarks'''
|-
|Ball bearing: 35x44x5mm 6707-2R
|4
|aliexpress
|3.00 €
| - Fixed typo in bearing trade number
|-
|Motor: Bringsmart JGY-370 12V 10rpm
|2
|aliexpress
|5.00 €
|
|-
|L298N bridge motor controller
|1
|aliexpress
|4.00 €
|
|}







<br />