SatNOGS Client Ansible

From SatNOGS Wiki
Revision as of 21:41, 11 September 2019 by Acinonyx (talk | contribs) (Raspbian)

Intro

SatNOGS Client Ansible is the suggested method to install SatNOGS Client (and friends) to a system. It currently supports Raspbian and Debian Stretch.

Raspbian

For Raspberry Pi, which is the reference platform for SatNOGS, a Raspbian image with SatNOGS Client Ansible pre-installed is available.

Debian

Important.png
Skip this section if you are using SatNOGS Raspbian image and SatNOGS Client Setup. Follow these instructions if you are provisioning SatNOGS to Debian from another host or are installing on the same host.

These sections contain generic instructions for installing SatNOGS Client on a Debian Stretch system.

Prerequisites

  • Download and install Debian 9 from here;
    https://www.debian.org/releases/stretch/debian-installer/
    Chose the net installer if you want to run a headless server. Only download AMD64 version. gr-satnogs does not support i386.
    Install on your target machine and install the ssh server.
  • Add your user to the sudo group; Become root. su usermod -aG sudo yourUserName
  • A host system with Git and latest version of Ansible installed
    Edit this file to install the latest Ansible. nano /etc/apt/sources.list
    Add the following two lines to the bottom of the file;
    deb http://ftp.debian.org/debian stretch-backportsmain
    deb-src http://ftp.debian.org/debian stretch-backports main
  • On the host system run the following commands.
apt-get update
apt-get install -t stretch-backports ansible
apt-get install sudo
apt-get install git
apt-get install sshpass

SatNOGs Install Instructions

On the host system run the following commands:


     $ git clone https://gitlab.com/librespacefoundation/satnogs/satnogs-client-ansible.git    # Clone SatNOGS Client Ansible repository
     $ cd satnogs-client-ansible                              # Change to cloned repository directory
     $ cp -r production.dist production                       # Copy dist configuration
     $ vi production/inventory/hosts                          # Update file with your own target host e.g.127.0.0.1, user and SSH password
     $ ssh youruser@yourtargetsystem true                     # Test SSH connection to target system
     $ ansible-playbook -i production/inventory -K site.yml   # Run Ansible playbook
     $ ssh -t youruser@yourtargetsystem sudo satnogs-setup    # Setup SatNOGS client (see below)

SatNOGS Client Setup

satnogs-setup is a script for configuring a system installed with SatNOGS Client Ansible.

Initial Setup

Right after the first boot of the system, packages and the configuration tool itself must be updated. Follow the Updating instruction found below.

To configure a SatNOGS Client Ansible system:

  1. SSH into the system and run sudo satnogs-setup; this will bring up the configuration menu
  2. Set Basic Configuration (see below)
  3. Select Apply and the Raspberry Pi will configure itself; this may take some time
  4. Select Back to exit
Idea.png
You can always reconfigure the software by running sudo satnogs-setup again.

Basic Configuration

Setting Description
SATNOGS_API_TOKEN The API token assigned to your ground station on the SatNOGS Network website, please don’t share your api key as this can give access to anyone to upload and change things in network related to your station and its observations.
SATNOGS_RX_DEVICE If you are using an RTL-SDR, this is rtlsdr. Other devices supported by gr-satnogs include usrpb200, usrp2, airspy or hackrf; a complete list can be found here.
SATNOGS_STATION_ELEV The height of your ground station above sea level in metres.
SATNOGS_STATION_ID The numeric ID assigned to your station in the SatNOGS Network site when the groundstation was created.
SATNOGS_STATION_LAT The latitude of your station. North is positive, south is negative.
SATNOGS_STATION_LON The longitude of your station. East is positive, west is negative.
HAMLIB_UTILS_ROT_ENABLED Whether or not to enable the Hamlibs rotator daemon. Rotctld is a software daemon that provides a network server to control a rotator on a serial port. If you don't have a rotator (like the No rotator setup), enter NO.
HAMLIB_UTILS_ROT_OPTS Options for rotcld:

For a yaesu rotator, use -m 601 -r /dev/ttyACM0 -s 9600 -T 0.0.0.0

For a SatNOGS rotator -m 204 -s 19200 -r /dev/ttyACM0 -C timeout=200 or -m 204 -s 19200 -r /dev/ttyUSB0 -C timeout=200

Advanced Setup

Important.png
Changing these settings is not recommended unless you're developing SatNOGS.

A more detailed description on setting up a development environment using the SatNOGS reference setup is given in SatNOGS_Client_Development.

Setting Description
APT_REPOSITORY This options allows you to change the SatNOGS packages repository. For example, to install unstable package builds use:

deb http://download.opensuse.org/repositories/home:/librespace:/satnogs_unstable/Raspbian_10 ./

APT_KEY_URL This options allows you to change the SatNOGS packages repository key URL. For example, to install unstable package builds use:

http://download.opensuse.org/repositories/home:/librespace:/satnogs_unstable/Raspbian_10/Release.key

APT_KEY_ID This options allows you to specify an alternative SatNOGS packages repository key ID.
SATNOGS_CLIENT_URL If you to try a development version of satnogs-client, you can change the URL here. The URL needs to be in PIP format. Here are some examples:
  • git+https://gitlab.com/librespacefoundation/satnogs/satnogs-client.git@0 -- the '0' branch (the current development version) of satnogs-client
  • git+https://gitlab.com/jdoe/satnogs-client.git@new-feature -- the 'new-feature' branch of jdoe's fork of satnogs-client
SATNOGS_RADIO_GR_SATNOGS_VERSION This options allows you to change the version of gr-satnogs package to be installed. For example:

1.5.1-1

RF_GAIN RF Gain value for your SDR hardware. Defaults can be found here.
  • For rtl-sdr possible values are the following: 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6

Updating SatNOGS Client software

To update all Debian packages to the latest you can use the normal APT updating methods. SSH into the system and run the following commands:

            $ sudo apt-get update
            $ sudo apt-get -y upgrade
            $ sudo reboot

To update SatNOGS software, including the configuration tool itself:

  1. SSH into the system and (re-)run sudo satnogs-setup; this will bring up the configuration menu
  2. Select Update to update the configuration tool
  3. Select Apply and the Raspberry Pi will update itself; this may take some time
  4. Before exit, check at the top that you have the latest satnogs-client and gr-satnogs versions
  5. Select Back to exit

WARNING: An update can potentially interrupt a running observation!

Verification of correct installation

To see if satnogs-client has started successfully, check the logs with journalctl:

journalctl -u satnogs-client.service

You should see entries running approximately once per minute that look like this:

Oct 01 23:02:13 raspberrypi satnogs-client[6695]:  * Running on http://0.0.0.0:5000/ (Press CTRL+C to quit)
Oct 01 23:02:14 raspberrypi satnogs-client[6695]: 2017-10-01 23:02:14,466 - satnogsclient - INFO - [LD] Downlink thread waiting for first downlink packet
Oct 01 23:03:14 raspberrypi satnogs-client[6695]: 2017-10-01 23:03:14,450 - apscheduler.executors.default - INFO - Running job "get_jobs (trigger: interval[0:01:00], next run at: 2017-10-01 23:03:14 UTC)" (scheduled at 2017-10-01 23:03:14.423393+00:00)
Oct 01 23:03:47 raspberrypi satnogs-client[6695]: 2017-10-01 23:03:47,324 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:5011
Oct 01 23:03:47 raspberrypi satnogs-client[6695]: 2017-10-01 23:03:47,325 - satnogsclient - DEBUG - Sending message: []
Oct 01 23:03:47 raspberrypi satnogs-client[6695]: 2017-10-01 23:03:47,327 - apscheduler.executors.default - INFO - Job "get_jobs (trigger: interval[0:01:00], next run at: 2017-10-01 23:04:14 UTC)" executed successfully
Oct 01 23:04:14 raspberrypi satnogs-client[6695]: 2017-10-01 23:04:14,453 - apscheduler.executors.default - INFO - Running job "get_jobs (trigger: interval[0:01:00], next run at: 2017-10-01 23:04:14 UTC)" (scheduled at 2017-10-01 23:04:14.423393+00:00)
Oct 01 23:04:14 raspberrypi satnogs-client[6695]: 2017-10-01 23:04:14,484 - apscheduler.executors.default - INFO - Running job "post_data (trigger: interval[0:02:00], next run at: 2017-10-01 23:04:14 UTC)" (scheduled at 2017-10-01 23:04:14.436367+00:00)
Oct 01 23:04:14 raspberrypi satnogs-client[6695]: 2017-10-01 23:04:14,489 - apscheduler.executors.default - INFO - Job "post_data (trigger: interval[0:02:00], next run at: 2017-10-01 23:04:14 UTC)" executed successfully
Oct 01 23:04:15 raspberrypi satnogs-client[6695]: 2017-10-01 23:04:15,627 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:5011
Oct 01 23:04:15 raspberrypi satnogs-client[6695]: 2017-10-01 23:04:15,628 - satnogsclient - DEBUG - Sending message: []
Oct 01 23:04:15 raspberrypi satnogs-client[6695]: 2017-10-01 23:04:15,629 - apscheduler.executors.default - INFO - Job "get_jobs (trigger: interval[0:01:00], next run at: 2017-10-01 23:05:14 UTC)" executed successfully

If you see that, great -- you're ready to schedule your first observation! If not, check out the Troubleshooting page.