RF noise

From SatNOGS Wiki
Revision as of 20:53, 2 February 2019 by Cshields (talk | contribs) (redirect to troubleshooting)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Redirect page

Redirect to:

If you notice a noise in the waterfall every time motors are spinning, you will need to :

- Twist each pair or the motor wire

- Add properly grounding

- Add capacitor to the DC input of drivers

- wrap the motors wire with adhesite aluminum and then connect it to GND on driver side

- add ferites to motors wires

Rf noise.png