No rotator
From SatNOGS Wiki
| No-Rotator | |
|---|---|
| Information | |
| Type: | No-Rotator ground station for SatNOGS network. |
| Cost: | |
| Release Information | |
| Status: | Working |
| Latest Release: | [ ] |
| Repository: | [] |
| Documentation: | [] |
No-Rotator ground station uses a static antenna usually in VHF.
A Turnstile antenna that tunes at ~137MHz is used for NOAA satellites.
Some Turnstile antenna design, are wide enough to receive VHF band at 144 - 146 MHz.
For more vertical satellite passes, UHF Helical antennas receive satellites at 432 - 438 MHz,
e.g. [1]
Same setup could be used for a ground station with rotator.
Bill of Materials
The materials are categorized into 4 groups:
- RF components
- Client components
- Hardware components
- Tools
| Part | Qty | Source | Price per Unit ($) |
| RTL-SDR | 1 | [2] | 21 |
| SMA Male to SMA Male Connector Pigtail Cable | 1 | [3] | 1 |
| LNA with FM-Notch | 1 | [] | 35 |
| RG-58 cable, 2.2m | 1 | [] | - |
| SMA Male cable connector | 1 | [] | - |
| Type-N Female chassis connector | 1 | [] | - |
| Type-N Male cable connector | 2 | [] | - |
| Turnstile antenna with Type-N Female connector | 1 | [] | - |
| Raspberry Pi 3 - Model B | 1 | [4] | 40 |
| Raspberry Pi 3 Case | 1 | [5] | 5 |
| SD Card, Class 10, 32GB, Kingston, Sandisk | 1 | [6] | 10 |
| Micro USB Active POE Splitter Power for Raspberry pi 3 Board (48V to 5V 2.4A) | 1 | [7] | 12 |
| POE-48-24W-BULK POE Adapter 48V, 0.5A, 24W | 1 | [8] | 13 |
| Ethernet LAN RJ45 Outdoor Waterproof Connector | 1 | [9] | 3.6 |
| Cable, Male USB-Micro to Male USB-A, L=25cm | 1 | [] | 1 |
| Cable, Female USB-A to Male USB-A, L=25cm | 1 | [] | 1 |
| Ring Core Ferrite Bead for USB cables | 2 | [10] | 0.8 |
| Ethernet cable, outdoor, CAT5 or higher, L=?m | 1 | [] | |
| 1 | [] |
Assembly instructions
Operation
Follow the instructions for setting up the Raspberry Pi 3 to setup your station. Then consult the Operation page for getting started on our Network.
