Difference between revisions of "RF noise"
From SatNOGS Wiki
(Created page with "If you notice a noise in the waterfall every time motors are spinning, you will need to : - Twist each pair or the motor wire - Add properly grounding - Add capacitor to the...") |
|||
| Line 2: | Line 2: | ||
- Twist each pair or the motor wire | - Twist each pair or the motor wire | ||
| + | |||
- Add properly grounding | - Add properly grounding | ||
| + | |||
- Add capacitor to the DC input of drivers | - Add capacitor to the DC input of drivers | ||
| + | |||
| + | - wrap the motors wire with adhesite aluminum and then connect it to GND on driver side | ||
| + | |||
| + | - add ferites to motors wires | ||
Revision as of 20:09, 30 May 2018
If you notice a noise in the waterfall every time motors are spinning, you will need to :
- Twist each pair or the motor wire
- Add properly grounding
- Add capacitor to the DC input of drivers
- wrap the motors wire with adhesite aluminum and then connect it to GND on driver side
- add ferites to motors wires
