Difference between revisions of "Build"
(What parts are going to be required in order to complete the v3 build) |
|||
| Line 1: | Line 1: | ||
| − | [[Bill of Materials (BOM)]] | + | |
| + | == [[Bill of Materials (BOM)]] == | ||
| + | |||
The following items will be needed in order to complete the v3 build. They are split into the Azimuth and elevation sections | The following items will be needed in order to complete the v3 build. They are split into the Azimuth and elevation sections | ||
| Line 8: | Line 10: | ||
Elevation | Elevation | ||
''Need link to spreadsheet'' | ''Need link to spreadsheet'' | ||
| + | |||
| + | |||
| + | == Build Sequence == | ||
| + | |||
| + | For the v3 build sequence go here[http://satnogs.dozuki.com/c/SatNOGS_Hardware] | ||
| + | |||
| + | |||
| + | == Sources for parts == | ||
| + | |||
| + | 3d Printing at a Fab Lab- If you don't have your own 3d printer then a local Fab Lab may be able to do it for you. Fab Labs are places that have invested in the machinery and you can take the designs to them. Generally they need .stl files to import into the software that runs the machines but this should be discussed with the Fab Lab. You then pay for the colume of material or tme or a combination of the two for each of the parts [http://www.fabfoundation.org/fab-labs/] | ||
| + | |||
| + | T Slot - If you don't want to cut the pieces yourself then here is a UK supplier[http://www.kjnltd.co.uk/] | ||
| + | Hidden corner connectors - AliExpress gave the cheapest supplier | ||
| + | |||
| + | Stepper Motors - eBay | ||
| + | |||
| + | Belts - eBay | ||
| + | |||
| + | Fixings - eBay | ||
Revision as of 19:12, 24 February 2016
Bill of Materials (BOM)
The following items will be needed in order to complete the v3 build. They are split into the Azimuth and elevation sections
Azimuth Need link to spreadsheet
Elevation Need link to spreadsheet
Build Sequence
For the v3 build sequence go here[1]
Sources for parts
3d Printing at a Fab Lab- If you don't have your own 3d printer then a local Fab Lab may be able to do it for you. Fab Labs are places that have invested in the machinery and you can take the designs to them. Generally they need .stl files to import into the software that runs the machines but this should be discussed with the Fab Lab. You then pay for the colume of material or tme or a combination of the two for each of the parts [2]
T Slot - If you don't want to cut the pieces yourself then here is a UK supplier[3] Hidden corner connectors - AliExpress gave the cheapest supplier
Stepper Motors - eBay
Belts - eBay
Fixings - eBay
