Difference between revisions of "Rotators"
m (add product links) (Tag: Visual edit) |
m (Linking alfa spid page) (Tag: Visual edit) |
||
| Line 46: | Line 46: | ||
Docs to be written, but we do have successful stations using this rotator with the SatNOGS client. | Docs to be written, but we do have successful stations using this rotator with the SatNOGS client. | ||
| + | * [[SPID Big RAS|Alfa Spid SatNOGS Wiki page]] | ||
* [http://alfaradio.ca/alfaspid-azel.html Alfa Spid product link] | * [http://alfaradio.ca/alfaspid-azel.html Alfa Spid product link] | ||
| | | | ||
Revision as of 20:55, 2 February 2019
The SatNOGS Client uses hamlib to speak to a rotator. With this, we are able to support almost any commercially available rotator, and have the flexibility to support home built rotators that implement protocols like EasyComm or Yaesu GS-232.
If you would rather start with a stationary antenna setup (no rotator), see our omnidirectional guide.
Commercial Rotators |
Homebuilt Rotators | |
|---|---|---|
 Yaesu G-5500The G-5500 is a common rotator for amateur radio AZ/EL applications. The SatNOGS client interfaces with this rotator via the hamlib library. While a commercial computer interface is available from Yaesu, the SatNOGS project provides an open hardware design that is much cheaper.
|
 SatNOGS Rotator v2The v2 rotator is not recommended, as v3 provides much greater strength and durability. These docs remain for historical purposes. | |
 Portable Rotation AZ/ELDocs to be written, but we do have successful stations using this rotator with the SatNOGS client. |
 SatNOGS Rotator v3The v3 rotator is a complete overhaul on the v2 design. The 2020 slotted extrusion frame and larger gears provide for a stronger rotator with greater wind loading. | |
 Alfa Spid X-YDocs to be written, but we do have successful stations using this rotator with the SatNOGS client. |
