No rotator

No-Rotator
No-Rotator
Information
Type:	No-Rotator ground station for SatNOGS network.
Cost:
Release Information
Status:	Working
Latest Release:	[ ]
Repository:	[]
Documentation:	[]

No-Rotator ground station it uses a static antenna usually in VHF. A Turnstile antenna that tuned at ~137MHz is used for NOAA satellites. Some Turnstile antenna designs, it's wide enough to receive VHF band at 144 - 146 MHz. For more vertical satellite passes, UHF Helical antennas receives satellites at 432 - 438 MHz, e.g. [1]

Same setup could be used for a ground station with rotator.

Bill of Materials

The materials are categorized into 3 groups:

• RF components
• Client components
• Hardware components

Part	Qty	Source	Price per Unit ($)
RTL-SDR	1	[2]	21
SMA Male to SMA Male Connector Pigtail Cable	1	[3]	1
LNA with FM-Notch	1	[4]	35
RG-58 cable, 2.2m	1	[]	-
SMA Male cable connector	1	[]	-
Type-N Female chassis connector	1	[]	-
Type-N Male cable connector	2	[]	-
Turnstile antenna with Type-N Female connector	1	[]	-
Raspberry Pi 3 - Model B	1	[5]	40
Raspberry Pi 3 Case	1	[6]	5
SD Card, Class 10, 32GB, kingston, sandisk	1	[]	16
Micro USB Active POE Splitter Power for Raspberry pi 3 Board (48V to 5V 2.4A)	1	[7]	12
POE-48-24W-BULK POE Adapter 48V, 0.5A, 24W	1	[8]	13
Ethernet LAN RJ45 Outdoor Waterproof Connector	1	[9]	3.6
cable, Male USB Micro to Male USB A, L=25cm	1	[]	1
cable, Female USB A to Male USB A, L=25cm	1	[]	1
Ring Core Ferrite Bead for USB cables	2	[]	0.8
Ethernet cable, outdoor, CAT5, ?m	1	[]