Operation

Scheduling your first test observation

Assumptions:

• You've set up your SatNOGS client successfully
• You've created an account on the Stage Environment, created a ground station, and it's showing up as "online"

If you've run into any problems with those steps, check out the Troubleshooting page or ask for help in the community forum, the Matrix room, or on IRC at #satnogs on Freenode.

SatNOGS Network:

• Navigate your ground station page in the Stage Environment (user name -> "My Profile" -> click on the name of your ground station).
• Select the "Upcoming passes" tab.
• Look for a pass with a "schedule" button that isn't greyed out, and click it.
• In the "New Observation" page that comes up, click the "Calculate" button, then click "Schedule".
• You should now see a page for that observation; in the "Waterfall" tab, you should see "Waiting for waterfall".

Ground Station

Now SSH to your ground station computer and run these steps:

• Follow the satnogs-client logs. Depending on your setup, this might be done with journalctl -f -u satnogs-client.service, or tail -F /var/log/supervisor/satnogs.log
• Before the observation is scheduled to start, you should see your client wake up once per minute to check for new jobs:

Oct 02 00:16:02 raspberrypi satnogs-client[10124]: 2017-10-02 00:16:02,477 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:5011
Oct 02 00:16:02 raspberrypi satnogs-client[10124]: 2017-10-02 00:16:02,479 - satnogsclient - DEBUG - Sending message: [{"origin": "network", "transmitter": "uXJ8NQNcH8b9osRc
Oct 02 00:16:02 raspberrypi satnogs-client[10124]: 2017-10-02 00:16:02,488 - apscheduler.executors.default - INFO - Job "get_jobs (trigger: interval[0:01:00], next run at: 2
Oct 02 00:16:59 raspberrypi satnogs-client[10124]: 2017-10-02 00:16:59,615 - apscheduler.executors.default - INFO - Running job "get_jobs (trigger: interval[0:01:00], next r
Oct 02 00:16:59 raspberrypi satnogs-client[10124]: 2017-10-02 00:16:59,661 - apscheduler.executors.default - INFO - Running job "post_data (trigger: interval[0:02:00], next 
Oct 02 00:16:59 raspberrypi satnogs-client[10124]: 2017-10-02 00:16:59,668 - apscheduler.executors.default - INFO - Job "post_data (trigger: interval[0:02:00], next run at: 
Oct 02 00:17:00 raspberrypi satnogs-client[10124]: 2017-10-02 00:17:00,906 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:5011
Oct 02 00:17:00 raspberrypi satnogs-client[10124]: 2017-10-02 00:17:00,908 - satnogsclient - DEBUG - Sending message: [{"origin": "network", "transmitter": "uXJ8NQNcH8b9osRc
Oct 02 00:17:00 raspberrypi satnogs-client[10124]: 2017-10-02 00:17:00,912 - apscheduler.executors.default - INFO - Job "get_jobs (trigger: interval[0:01:00], next run at: 2

• At the scheduled time for the observation, you should see the client kick off the observation:

Oct 02 00:18:00 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:00,774 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:5011
Oct 02 00:18:00 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:00,776 - satnogsclient - DEBUG - Sending message: [{"origin": "network", "transmitter": "uXJ8NQNcH8b9osRc
Oct 02 00:18:00 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:00,781 - apscheduler.executors.default - INFO - Job "get_jobs (trigger: interval[0:01:00], next run at: 2
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,022 - apscheduler.executors.default - INFO - Running job "spawn_observer (trigger: date[2017-10-02 00:
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,082 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:4533
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,109 - satnogsclient - DEBUG - Sending message: p
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,110 - satnogsclient - DEBUG - Received message: 0.000000
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 0.000000
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,111 - satnogsclient - DEBUG - Opening TCP socket: 127.0.0.1:4532
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,115 - satnogsclient - DEBUG - Sending message: P 188.276951189 -0.0155264223734
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,119 - satnogsclient - DEBUG - Received message: RPRT -1
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,143 - satnogsclient - DEBUG - Sending message: F 436038107
Oct 02 00:18:22 raspberrypi satnogs-client[10124]: 2017-10-02 00:18:22,144 - satnogsclient - DEBUG - Received message: RPRT 0

• After the observation is over, you should see the client submit the data to the SatNOGS network

In the SatNOGS Stage Environment, refresh the Observation page. You should now see a waterfall plot for your data.

If that all worked -- congratulations! You've just successfully completed your first SatNOGS observation.

If it didn't work, don't feel bad -- it can take a few attempts before you get it right. Have a look at the Troubleshooting page for tips, and don't forget to contact the community if you need help.

Rating observations

Once your observation results are posted back in the Network by your satnogs-client, you should go to Network to rate your observations. Any orange marked observations need vetting by users.

The main purpose of validating observations is to know if the satellite/transmitter is alive, if it transmits in the listed frequency/ies, and if the TLEs we have are accurate.

The functionality may change in the future, but for now even a faint sign on the waterfall is enough to make it valid.

Orange need your rating!

Categories of observations:

• Good
  • You should mark observations as "Good" when it is clear from the waterfall and/or audio recording that a satellite is present.
• Bad
  • You should mark observations as "Bad" when by examining the waterfall and/or audio it is obvious that there was no satellite detected in this observation.

Below is a collection of waterfalls with possible results of observations:

• 

  Good: Satellite is visible (bars-bursts of data in the middle). Note that the tangent-shaped lines are local noise

• 

  Bad: Typical empty waterfall with no visible signals.

• 

  Good: Although drifting, satellite is clearly visible around the center.

• 

  Good: Faint CW signal around center-left. Note you might have to expand image to notice it

• 

  Good: Clearly visible FM transmission. Note that the swinging lines are terrestrial noise

• 

  Good: Straight line in the center bottom is a satellite. Note transmission on left bottom is the same satellite on a different frequency

Click the "Discuss" button to post in our web forum. (Note: this will only appear in the production SatNOGS network.)

Discuss

If you're still unsure about an observation, click the "Discuss" button, near the top right of the observation's page; that will post a link to it on the Observations forum, where you can ask for feedback.

Discuss button is only shown in the production instance of the SatNOGS network. If you have an observation in the dev instance you want help with, you can still post it manually to the Observations forum, and we'll be happy to help.