Difference between revisions of "SatNOGS Rotator v3"
From SatNOGS Wiki
(added intro) |
(updated release) |
||
| Line 4: | Line 4: | ||
|type= Az/El | |type= Az/El | ||
|status= Beta | |status= Beta | ||
| − | |latest-release= https://github.com/satnogs/satnogs-rotator | + | |latest-release= https://github.com/satnogs/satnogs-rotator/releases/tag/v3.0 |
| − | |latest-release-name= v3 | + | |latest-release-name= Torx Flathead (v3.0) |
|source-repo= https://github.com/satnogs/satnogs-rotator | |source-repo= https://github.com/satnogs/satnogs-rotator | ||
|documentation= http://satnogs.dozuki.com/Guide/SatNOGS+Rotator+v3+Mechanical+Assembly | |documentation= http://satnogs.dozuki.com/Guide/SatNOGS+Rotator+v3+Mechanical+Assembly | ||
Revision as of 13:34, 1 February 2016
| SatNOGS Rotator v3 | |
|---|---|
| Rotator Information | |
| Type: | Az/El |
| Cost: | {{{cost}}} |
| Release Information | |
| Status: | Beta |
| Latest Release: | Torx Flathead (v3.0) |
| Repository: | [1] |
| Documentation: | [2] |
Contents
Intro
v3 marks a major re-haul of the SatNOGS Rotator design, with learnings from v2 applied. You can see a lot of the thinking and background research that was conducted prior to v3 development in this thread.
Specifications
| ' | SatNOGS v3 Rotator |
| Plastic Parts | 26 |
| Non Printed Parts approx. | 345 |
| Cost | ~ $220 |
| Controller Electronics | SatNOGS Rotator Controller |
| Type | Az/El (possible X/Y) |
| Motors | 2x NEMA 17 Stepper or 2x DC Motors |
| Frame Material | Aluminum T-slot 20x20 |
| Pro | |
| Con | |
