Understanding satnogs-flowgraphs

From SatNOGS Wiki
Revision as of 16:43, 7 May 2020 by Pablo.pita (talk | contribs) (Setting yourself up)

I'm not entirely sure where to put this, but perhaps someone more experienced can move and link this from a sensible location. This started as a question continuing the How to open satnogs iq.dat files thread but as I worked through after picking things up after initially having a problem I realised everything I'd described now magically worked! Typical. Worth documenting.

Setting yourself up

You need GNU Radio and satnogs-flowgraphs together with its dependencies like gr-satnogs and gr-soapy.

The easiest would be to have a supported distribution and do the normal installation of the binaries from repositories like the one from satnogs. In my case, I am using a virtual Ubuntu 19.10 machine grabbed from osboxes.org. Overthere, a recent GNU Radio is available from the official repository. The gr-soapy package is available from PothosCore PPA external repository. As there are no ubuntu packages for satnogs-flowgraphs and gr-satnogs, those need to be built from the gitlab source. The recipe for building the Debian packages can be adapted for Ubuntu. For gr-satnogs, that means something like this:

sudo apt-get -qy install gnupg libcurl4 devscripts git-buildpackage
git clone https://gitlab.com/librespacefoundation/satnogs/gr-satnogs.git
cd gr-satnogs
sudo mk-build-deps -i -r -t "apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends -y"
PACKAGE_VERSION="${PACKAGE_VERSION:-$(git describe --abbrev=8 2>/dev/null | tr '-' '+' || true)}" 
echo $PACKAGE_VERSION  # Or set it directly if not set OK
dch -b -M -v "${PACKAGE_VERSION}-1" "Bump to version '${PACKAGE_VERSION}-1'" 
dch -r -m ""  
sed -i '/0001-remove-git-maint-version.patch/ d' debian/patches/series
cat debian/patches/series
debuild --unsigned-source --unsigned-changes --build=binary 

Proceed similarly for satnogs-flowgraphs.

Storing an IQ recording

There are options in satnogs-setup under Advanced > Radio to store IQ files:

  • ENABLE_IQ_DUMP: Enable IQ dump
  • IQ_DUMP_FILENAME: Define IQ dump filename [/tmp/.satnogs/iq.raw]

Beware, IQ files are huge (220MB for my APT pass example below). They're stored in /tmp so therefore in RAM and are overwritten with each pass. You can do something clever to upload them elsewhere, but for playing just grab a copy immediately after a pass.

Don't worry about storing much else (which also vanishes quickly). You can easily grab waterfalls and OGG recording from the database via Glouton.

GNU Radio Companion

Here I'm working with Observation #2073316 as an example. I've saved a copy of the IQ recording my station briefly stored at `/tmp/.satnogs/iq.raw`. This is about 220 MB. I even remembered to turn the IQ collection off afterwards or it would be storing stuff on top of each other forever.

So where did the IQ come from?

In my case, I'm playing with an APT pass. It is therefore processed by satnogs-flowgraphs/satellites/noaa_apt_decoder.grc. Other signals use other flowgraphs. The default where nothing else is suitable appears to be satnogs-flowgraphs/generic/fsk.grc.

Flowgraph save.png

That is, it's post Doppler correction, which includes an LO (Local Oscillator) offset; and the values are scaled to shorts, although 16768 seems an weird number as I'd have expected a power of two - 16384? I don't imagine it makes a lot of difference as it'll still fit in the short just lose a little bit of dynamic range.

Feeding your IQ in

Loading the IQ into beginning of the flowgraph in requires some GNU Radio modules chaining together. Starting with How to open satnogs iq.dat files you'll end up with something beginning like the below. It takes the file source, throttles the output to real-time, then converts the short values to complex real including reversing the scaling division. This feeds then into the existing flowgraph exactly where it left off.

Flowgraph open.png

Sample rate

It took some time for me to work out the appropriate sample rate. Here's my methodology:

The IQ recording is generated by the flowgraph in use. If there's no particular decoder in use then that's GNURADIO_DEFAULT_SCRIPT_FILENAME (see settings.py as it keeps changing in HEAD - satnogs_fsk_ax25.py, then fsk.grc and now fm.grc). The flowgraph can vary, but it's probably fairly similar for each on the front end.

From fsk.grc:

  1. Soapy Source collects data at samp_rate_rx.
  2. Doppler Compensation takes samp_rate_rx and aims for a Target Sampling Rate of baudrate*decimation (in fsk.grc) or audio_samp_rate (in fm.grc). One assumes these should normally be identical, but perhaps someone brighter can explain the difference and how Doppler Compensation converts - decimation?
  3. IQ sink stores the data to iq_file_path, with a scaling factor of 16768 applied.


Where do these parameters come from?

All observation jobs come via scheduler/tasks.py. This grabs scheduled jobs from the Satnogs network. In JSON format, the jobs look something like this:

[
    {
        "id": 2164959,
        "start": "2020-05-06T18:53:17Z",
        "end": "2020-05-06T19:00:30Z",
        "ground_station": 1450,
        "tle0": "0 METEOR M2",
        "tle1": "1 40069U 14037A   20126.65202808 -.00000042  00000-0  13670-6 0  9996",
        "tle2": "2 40069  98.5071 165.7965 0006707  53.4504 306.7289 14.20671999302133",
        "frequency": 137100000,
        "mode": "LRPT",
        "transmitter": "CojkGDaq3u42nRdLdfczng",
        "baud": 80000

    },
    {

        "id": 2164887,
        "start": "2020-05-06T15:51:13Z",
        "end": "2020-05-06T16:06:30Z",
        "ground_station": 1450,
        "tle0": "0 NOAA 19",
        "tle1": "1 33591U 09005A   20126.94623650 +.00000063 +00000-0 +59678-4 0  9999",
        "tle2": "2 33591 099.1965 131.1873 0013769 190.9197 169.1677 14.12406430579135",
        "frequency": 137100000,
        "mode": "APT",
        "transmitter": "kE4VaYKpnFmzEquEjKKi8D",
        "baud": null
    }
]

Clearly, there is no sample rate in those, but there is a mode and a baudrate. So that information brings many parameters. Others come from the satnogs configuration done via sudo satnogs-setup.


How do these parameters get to the flowgraph?

The function exec_gnuradio in satnogsclient/upsat/gnuradio_handler.py#L60 takes all the parameters collected and passes them as command line arguments to the relevant flowgraph. It looks like the samp-rate-rx comes from SATNOGS_RX_SAMP_RATE in settings.py.


So where does the sample rate actually come from!?

Ah, it looks like it's actually static and stored in /etc/ansible/host_vars/localhost:

...

satnogs_rx_samp_rate: 2.048e6

...

So it's a static sample rate regardless of flowgraph. Okay, that might explain why the Doppler Compensation has different output sample rate and does some kind of decimation.

Note: it looks like the new fm.grc doesn't pass a baudrate - what effect will this have on things like LPRT that don't have their own flowgraph handled at present?

Summary

The key value is the Doppler Compensation Target Sampling Rate.

For the simple case of APT imaging through noaa_apt_decoder.grc this is pretty simple. it's a static value 4*4160*4 or 66,560.

It's a more complicated case for say an LRPT signal from METEOR M2 for example. This runs through satnogs_fsk_ax25.py at least in my live system. One needs to look at the database page and get the Baud rate of the relevant transmitter (80,000 in this case). Then look at the Doppler Compensation Target Sampling Rate again which turns out to be baudrate*decimation. Argh! Decimation turns out to be max(4,satnogs.find_decimation(baudrate, 2, audio_samp_rate)). So what's audio_samp_rate? Luckily it's static and set in satnogs_fsk_ax25.py to 48e3.

Using gr-satnogs/python/utils.py, this is easy to calculate:

>>>> import utils as satnogs
>>>> baudrate = 80000
>>>> audio_samp_rate = 48000
>>>> max(4,satnogs.find_decimation(baudrate, 2, audio_samp_rate))
4

So, by my calculation, my IQ should be at 4 * 80,000 = 320,000. Hopefully.

Alternative route

After all this hassle, I think the easy fix is the put in a pre-observation script to dump to the logfile! Looks like the following will give me most of what I need, although I'll still need to do some maths.

echo {{ID}} {{BAUD}} {{SCRIPT_NAME}}

Results

Initially, the waterfall may look a bit busy compared to the one from the observation. There's obviously some gain setting within the waterfall I've not yet mastered, or the Satnogs ones does something slightly cleverer.

Waterfall.png

Yep. It turns out you can set the intesity min and max to better reflect the signal and get a cleaner display. Still not as good as the observation page one, but maybe that fiddles with the FFT size too.

Better.png

However, if you peer closer you can just about make out the feint telltales of an APT signal.

Following the flowgraph through to output shows an identical output to that on the observation. Result!

Visual.png

OGG

For completeness, you can do the same thing using the OGG file as a source. Again, you need to reverse any resampling or other changes that were done before saving to file before feeding back into the flowgraph at an appropriate point. The throttle is optional, and in the screenshot bypassed:

Flowgraph all.png