Difference between revisions of "SatNOGS Monitor"
m (Added line about running on any non satnogs station computer in description. Added "tab key" info in "running" section.)
m (→Build and install libgpredict)
|Line 20:||Line 20:|
sudo ldconfig # for linux
sudo ldconfig # for linux
Latest revision as of 08:49, 10 November 2019
SatNOGS Monitor is a terminal ui to monitor your and/or other ground stations of the SatNOGS network. It is written in Rust and runs on Linux and has been reported to run on MacOS. Windows is currently not supported by the underlying terminal library, but might be added at some point in the future. SatNOGS Monitor does not need to be installed on an actual SatNOGS station computer (although there are benefits to doing so as discussed below).
SatNOGS Monitor uses bindings to libgpredict. This library is not available as installable package and you'll have to build it yourself.
Install libgpredict dependencies
sudo apt-get install libglib2.0-dev cmake build-essential git
Build and install libgpredict
git clone https://github.com/cubehub/libgpredict.git cd libgpredict mkdir build cd build cmake ../ make sudo make install sudo ldconfig # for linux
Raspberry Pi (armhf)
You can run the SatNOGS Monitor on the same Raspberry Pi as your ground station. You'll need to build and install libgpredict as shown above and can build the monitor from source (see [#Hacking]) or use the prebuild Raspbian package.
wget https://github.com/wose/satnogs-monitor/releases/download/0.2.0/satnogs-monitor_0.2.0_armhf.deb sudo dpkg -i satnogs-monitor_0.2.0_armhf.deb
You can then run the monitor over any ssh connection to your ground station or view it directly on a display attached to your RPi. See this thread for some inspiration.
If you're running an Debian like distribution you can install the prebuild package after building and installing libgpredict.
wget https://github.com/wose/satnogs-monitor/releases/download/0.2.0/satnogs-monitor_0.2.0_amd64.deb sudo dpkg -i satnogs-monitor_0.2.0_amd64.deb
See [#Hacking] if you're running another distribution.
The monitor makes heavy usage of braille unicode characters so make sure your terminal emulator uses a font which includes those glyphs. The screenshot at the top shows alacritty with the tewi-font.
Monitor single station:
satnogs-monitor -s 175
satnogs-monitor -s 175 -s 227
Monitor a station on the same machine as the monitor runs (gets you more system infos):
satnogs-monitor -l 175
Monitor a local station and multiple remote stations:
satnogs-monitor -l 175 -s 227 -s 2
You can also create a config file with all those informations:
mkdir ~/config/satnogs-monitor cd ~/config/satnogs-monitor wget https://raw.githubusercontent.com/wose/satnogs-monitor/master/monitor/examples/config.toml edit config.toml
Check the help for more command line arguments:
$ satnogs-monitor -h satnogs-monitor 0.2.0 Monitors the current and future jobs of SatNOGS ground stations. USAGE: satnogs-monitor [FLAGS] [OPTIONS] FLAGS: -h, --help Prints help information -V, --version Prints version information -v Sets the level of log verbosity OPTIONS: -a, --api <URL> Sets the SatNOGS network api endpoint url -c, --config <FILE> Sets custom config file -l, --local <ID>... Adds a station running on the same machine as this monitor with this SatNOGS network id to to the list of monitored stations -o, --orbits <NUM> Sets the number of orbits plotted on the map -s, --station <ID>... Adds a station with this SatNOGS network id to the list of monitored stations
TAB key will cycle through available stations while SatNOGS Monitor is running.
To build the monitor from source you'll need to install the Rust. Use your package manager or follow this site.
git clone https://github.com/wose/satnogs-monitor.git cd satnogs-monitor/monitor mkdir ~/.config/satnogs-monitor cp examples/config.toml ~/.config/satnogs-monitor/ edit ~/.config/satnogs-monitor/config.toml cargo run --release -- -s 175