Difference between revisions of "Rotators"

From SatNOGS Wiki
(Change place)
 
(One intermediate revision by the same user not shown)
Line 54: Line 54:
 
*[http://alfaradio.ca/alfaspid-azel.html Alfa Spid product link]
 
*[http://alfaradio.ca/alfaspid-azel.html Alfa Spid product link]
 
|
 
|
|
+
|[[File:SuperAntennaz.jpeg|left|frameless|150x150px]]
==== [[Metal antenna rotator|Metal Antenna Rotator]] ====
+
 
A simple metal antenna rotator by User:Jujun
+
====[[SuperAntennaz]]====
<br />
+
 
 +
SuperAntennaz is an all metal antenna rotator designed for satellite traking by user Yohan HADJI
 +
 
 +
*Repository : https://github.com/YohanHadji/SuperAntennaz
 +
 
 
|-
 
|-
 
|[[File:Dwingleloo.png|left|frameless|100x100px]]
 
|[[File:Dwingleloo.png|left|frameless|100x100px]]
Line 69: Line 73:
 
|
 
|
 
|
 
|
 +
==== [[Metal antenna rotator|Metal Antenna Rotator]] ====
 +
A simple metal antenna rotator by User:Jujun
 +
<br />
 
|}
 
|}
  

Latest revision as of 17:39, 1 May 2021


The SatNOGS Client uses hamlib to speak to a rotator. With this, we are able to support almost any commercially available rotator, and have the flexibility to support home built rotators that implement protocols like EasyComm or Yaesu GS-232.

In this wiki page you could read a review about the AZ/EL rotators, which are popular in HAM community.

If you would rather start with a stationary antenna setup (no rotator), see our omnidirectional guide.

Commercial Rotators (review)

Homebuilt Rotators

G5500.jpg

Yaesu G-5500

The G-5500 is a common rotator for amateur radio AZ/EL applications. The SatNOGS client interfaces with this rotator via the hamlib library. While a commercial computer interface is available from Yaesu, the SatNOGS project provides an open hardware design that is much cheaper.

30033213301 ef78e64120 k.jpg

SatNOGS Rotator v2

The v2 rotator is not recommended, as v3 provides much greater strength and durability. These docs remain for historical purposes.

Portable Rotation.jpg

Portable Rotation AZ/EL

Docs to be written, but we do have successful stations using this rotator with the SatNOGS client.

V3.jpg

SatNOGS Rotator v3

The v3 rotator is a complete overhaul on the v2 design. The 2020 slotted extrusion frame and larger gears provide for a stronger rotator with greater wind loading.

Alfa Spid.jpg

Alfa Spid X-Y

SuperAntennaz.jpeg

SuperAntennaz

SuperAntennaz is an all metal antenna rotator designed for satellite traking by user Yohan HADJI

Dwingleloo.png

Dwingeloo Radio Observatory

(okay, you're not likely to keep a deep space observatory on the network, but it has been done!)

Metal Antenna Rotator

A simple metal antenna rotator by User:Jujun