Difference between revisions of "Rotators"

From SatNOGS Wiki
Line 1: Line 1:
  
==SatNOGS rotators==
+
==SatNOGS Rotators==
 
Our tracking mechanism is designed from scratch, parametric by default, 3D printed in under 8 hours. Utilizing two NEMA14 stepper motors we have unconstrained movement in Altitude and Azimuth.
 
Our tracking mechanism is designed from scratch, parametric by default, 3D printed in under 8 hours. Utilizing two NEMA14 stepper motors we have unconstrained movement in Altitude and Azimuth.
  
===SatNOGS rotator v2===
+
===SatNOGS Rotator v2===
  
 
Github:[https://github.com/satnogs/satnogs-rotator/tree/v2]
 
Github:[https://github.com/satnogs/satnogs-rotator/tree/v2]
  
===SatNOGS rotator v3===
+
===[[SatNOGS Rotator v3]]===
  
 
Github:[https://github.com/satnogs/satnogs-rotator/tree/master]
 
Github:[https://github.com/satnogs/satnogs-rotator/tree/master]

Revision as of 20:37, 7 March 2016

SatNOGS Rotators

Our tracking mechanism is designed from scratch, parametric by default, 3D printed in under 8 hours. Utilizing two NEMA14 stepper motors we have unconstrained movement in Altitude and Azimuth.

SatNOGS Rotator v2

Github:[1]

SatNOGS Rotator v3

Github:[2]

Electronics

Two Stepper motor drivers and an Arduino controlling them, are our driving electronics. Simple yet accurate.

Github:[3]