Difference between revisions of "No rotator"

From SatNOGS Wiki
 
(21 intermediate revisions by 7 users not shown)
Line 11: Line 11:
 
}}
 
}}
  
No-Rotator ground station it uses a static antenna usually in VHF.
+
==Introduction==
A Turnstile antenna that tuned at ~137MHz is used for NOAA satellites.
+
<br />
Some Turnstile design antennas could be also used for VHF band at 144 - 146 MHz.
+
 
For more vertical passes, UHF Helical antennas receives satellites at 432 - 438 MHz,  
+
{{Message|Warning: Mounting a complete station this close to the antenna (in particular without use of shielding or shielded network cables) can result in the stations performance being significantly limited by its own noise. It is advisable to mount the LNA at the antenna, and the rest of the station as far away as is practicable.}}
 +
 
 +
 
 +
No-Rotator ground station uses a static antenna usually in VHF.
 +
A Turnstile antenna that tunes at ~137MHz is used for NOAA satellites.
 +
Some Turnstile antenna design, are wide enough to receive VHF band at 144 - 146 MHz.
 +
For more vertical satellite passes, UHF Helical antennas receive satellites at 432 - 438 MHz,  
 
e.g. [https://network.satnogs.org/stations/8/]  
 
e.g. [https://network.satnogs.org/stations/8/]  
  
{{Message| Same setup could be used for rotator, TODO.}}
+
{{Message| Same setup could be used for a ground station with rotator.}}
  
= Bill of Materials =
+
==Bill of Materials==
  
The materials are categorized into 3 groups:
+
The materials are categorized into 4 groups:
* <span style="color:red">RF components</span>
 
* <span style="color:green">Client components</span>
 
* <span style="color:blue">Hardware components</span>
 
  
{| {{table}}
+
*<span style="color:red">RF components</span>
| align="center" style="background:#f0f0f0;"|'''Part'''
+
*<span style="color:green">Client components</span>
| align="center" style="background:#f0f0f0;"|'''Description'''
+
*<span style="color:blue">Hardware components</span>
| align="center" style="background:#f0f0f0;"|'''Qty'''
+
*<span style="color:#F0F000">Tools</span>
| align="center" style="background:#f0f0f0;"|'''Source'''
+
 
| align="center" style="background:#f0f0f0;"|'''Price'''
+
{| class="wikitable" {{table}}
 +
| style="background:#f0f0f0;" align="center" |'''Part'''
 +
| style="background:#f0f0f0;" align="center" |'''Qty'''
 +
| style="background:#f0f0f0;" align="center" |'''Source'''
 +
| style="background:#f0f0f0;" align="center" |'''Price per Unit ($)'''
 +
|-
 +
|<span style="color:red">RTL-SDR</span>||1||[https://www.nooelec.com/store/sdr/sdr-receivers/nesdr-smart-sdr.html]||21
 +
|-
 +
|<span style="color:red">SMA Male to SMA Male Connector Pigtail Cable</span>||1||[http://www.ebay.com/itm/6-5-Length-SMA-Male-to-SMA-Male-Connector-Pigtail-Cable-/182286107527?epid=1749479193&hash=item2a71194387:g:X~gAAOSwOyJX3z4o]||1
 +
|-
 +
|<span style="color:red">LNA with FM-Notch</span>||1||[]||35
 +
|-
 +
|<span style="color:red">RG-58 cable, 2.2m</span>||1||[]||-
 +
|-
 +
|<span style="color:red">SMA Male cable connector</span>||1||[]||-
 +
|-
 +
|<span style="color:red">Type-N Female chassis connector</span>||1||[]||-
 +
|-
 +
|<span style="color:red">Type-N Male cable connector</span>||2||[]||-
 +
|-
 +
|<span style="color:red">Turnstile antenna with Type-N Female connector</span>||1||[]||-
 +
|-
 +
|<span style="color:green">Raspberry Pi 3 - Model B</span>||1||[https://grobotronics.com/raspberry-pi-3-model-b.html]||40
 +
|-
 +
|<span style="color:green">Raspberry Pi 3 Case</span>||1||[https://grobotronics.com/raspberry-pi-2-square-case-transparent.html]||5
 +
|-
 +
|<span style="color:green">SD Card, Class 10, 32GB, Kingston, Sandisk</span>||1||[https://www.ebay.de/itm/Kingston-Micro-32Gb-Karte-Speicherkarte-Class-10-Sdhc-Microsd-Sdxc-Sd-Adapter/312674375371?epid=5030514522&hash=item48ccd856cb:g:7hsAAOSwvrddFMHS]||10
 +
|-
 +
|<span style="color:green">Micro USB Active POE Splitter Power for Raspberry pi 3 Board (48V to 5V 2.4A)</span>||1||[https://www.cableworks.gr/ilektronika/raspberry/raspberry-trofodotika/micro-usb-active-poe-splitter-power-for-raspberry-pi-3-board-48v-to-5v-2.4a-oem/]||12
 +
|-
 +
|<span style="color:green">POE-48-24W-BULK POE Adapter 48V, 0.5A, 24W</span>||1||[https://www.xpatit.gr/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=1766&Itemid=0]||13
 +
|-
 +
|<span style="color:green">Ethernet LAN RJ45 Outdoor Waterproof Connector</span>||1||[http://www.ebay.com/itm/Ethernet-LAN-RJ45-Outdoor-Waterproof-Connector-M20-Stable-Signal-Black-/271524476589?epid=700279670&hash=item3f381eb6ad:g:9z8AAOSwopRYb3v-]||3.6
 +
|-
 +
|<span style="color:green">Cable, Male USB-Micro to Male USB-A, L=25cm</span>||1||[]||1
 +
|-
 +
|<span style="color:green">Cable, Female USB-A to Male USB-A, L=25cm</span>||1||[]||1
 +
|-
 +
|<span style="color:green">Ring Core Ferrite Bead for USB cables</span>||2||[https://www.ebay.de/itm/10-tlg-EMI-Entstorfilter-Ferritfilter-Ferritkern-Klappferrit-fur-Kabel-3-5mm/312918249771?hash=item48db61912b:g:Y~8AAOSwIW9eCcT5]||0.8
 +
|-
 +
|<span style="color:green">Ethernet cable, outdoor, CAT5 or higher, L=?m</span>||1||[]||
 +
|-
 +
|<span style="color:blue"></span><span style="color:blue"></span>||1||[]||
 
|-
 
|-
| || || || ||
 
 
|}
 
|}
 +
 +
==Assembly Instructions==
 +
See pictures.
 +
 +
[[File:Liverpool_no_rotator_1.jpeg|400px|thumb|right|Inside the box 1]]
 +
[[File:IMG 20170621 100727.jpg|400px|thumb|right|RF Detail]]
 +
 +
==Operation==
 +
 +
Follow the instructions for setting up the [[Raspberry_Pi|Raspberry Pi 3]] to setup your station.
 +
Then consult the [[Operation]] page for getting started on our Network.
 +
 +
[[Category:Build]]
 +
[[Category:Hardware]]

Latest revision as of 09:25, 7 November 2020

No-Rotator
No-Rotator
Information
Type: No-Rotator ground station for SatNOGS network.
Cost:
Release Information
Status: Working
Latest Release: [ ]
Repository: []
Documentation: []
 


Introduction


Idea.png
Warning: Mounting a complete station this close to the antenna (in particular without use of shielding or shielded network cables) can result in the stations performance being significantly limited by its own noise. It is advisable to mount the LNA at the antenna, and the rest of the station as far away as is practicable.


No-Rotator ground station uses a static antenna usually in VHF. A Turnstile antenna that tunes at ~137MHz is used for NOAA satellites. Some Turnstile antenna design, are wide enough to receive VHF band at 144 - 146 MHz. For more vertical satellite passes, UHF Helical antennas receive satellites at 432 - 438 MHz, e.g. [1]

Idea.png
Same setup could be used for a ground station with rotator.

Bill of Materials

The materials are categorized into 4 groups:

  • RF components
  • Client components
  • Hardware components
  • Tools
Part Qty Source Price per Unit ($)
RTL-SDR 1 [2] 21
SMA Male to SMA Male Connector Pigtail Cable 1 [3] 1
LNA with FM-Notch 1 [] 35
RG-58 cable, 2.2m 1 [] -
SMA Male cable connector 1 [] -
Type-N Female chassis connector 1 [] -
Type-N Male cable connector 2 [] -
Turnstile antenna with Type-N Female connector 1 [] -
Raspberry Pi 3 - Model B 1 [4] 40
Raspberry Pi 3 Case 1 [5] 5
SD Card, Class 10, 32GB, Kingston, Sandisk 1 [6] 10
Micro USB Active POE Splitter Power for Raspberry pi 3 Board (48V to 5V 2.4A) 1 [7] 12
POE-48-24W-BULK POE Adapter 48V, 0.5A, 24W 1 [8] 13
Ethernet LAN RJ45 Outdoor Waterproof Connector 1 [9] 3.6
Cable, Male USB-Micro to Male USB-A, L=25cm 1 [] 1
Cable, Female USB-A to Male USB-A, L=25cm 1 [] 1
Ring Core Ferrite Bead for USB cables 2 [10] 0.8
Ethernet cable, outdoor, CAT5 or higher, L=?m 1 []
1 []

Assembly Instructions

See pictures.

Inside the box 1
RF Detail

Operation

Follow the instructions for setting up the Raspberry Pi 3 to setup your station. Then consult the Operation page for getting started on our Network.