Metal antenna rotator

From SatNOGS Wiki
Revision as of 17:26, 30 March 2018 by Jujun (talk | contribs) (Created page with "To build this metal antenna rotator you will need a welder. == Bill of materials == Nema23 stepper motor Wormgear 60:1 aliexpress.com/item/Ratio-20-1-self-lock-High-Torque-...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

To build this metal antenna rotator you will need a welder.


Bill of materials

Nema23 stepper motor Wormgear 60:1 aliexpress.com/item/Ratio-20-1-self-lock-High-Torque-L56mm-NEMA23-3A-RV30-Turbine-Worm-Gearbox-Geared/32681621498.html aliexpress.com/item/Ratio-20-1-self-lock-High-Torque-L112mm-NEMA23-4-2A-RV30-Turbine-Worm-Gearbox/32681645351.html

Bearing for the az axis 100x135x25 mm : aliexpress.com/item/51120-Thrust-Bearing-100x135x25-mm-ABEC-1-1-PC-Axial-51120-Thrust-Ball-Bearings-8120/32813388761.html

Stepper motor driver : aliexpress.com/item/2-Phase-Stepper-Driver-MA860-DSP-24V-80VDC-or-VAC16-70VAC-Output-6A-Current-NEMA-34/32785076340.html