Difference between revisions of "Main Page"

From SatNOGS Wiki
m (minor edit to increase box size)
(Updated main text and changed image to simpler view used elsewhere.)
Line 1: Line 1:
__NOTOC__
+
<p>__NOTOC__</p>
<p>SatNOGS is an integral part of the [https://libre.space Libre Space Foundation]. The project aims to build a global network of satellite ground stations. Designed as an open source participatory project, the hardware is straightforward to build using commonly available parts and some 3D printed elements. A ground station is built to interact with a website that holds key satellite information. The web interface allows a user to schedule a satellite observation of any of the networked ground stations.</p>
+
<p>SatNOGS is an integral part of the [https://libre.space Libre Space Foundation]. The project aims to build a global network of satellite ground stations. Designed as an open source participatory project based on the users operating a ground station that is accessed via a web page for all of the network users. A basic ground station can be made up of commercial off the shelf components that are commonly available with a static through to more complex stations with multiple movable antennas.</p>
<p>Here you can find more information on how to get started with SatNOGS, building and operating a satellite ground station and joining the SatNOGS Network.</p>
+
<p>If you would like to build your own ground station and have limited knowledge then it is recommended that you follow a non-rotator build with a simple RTL-SDR dongle and a Raspberry Pi. This will get you on to the network quickly and allow you to start scheduling observations. There are a few choices to be made but he community are available to help if you need it. More complex, movable, antenna systems can be steered with either the SatNOGS designed rotator or a commercial unit such as the Yaesu GS5500, Spid XY or similar. It is recommended that these types of builds are for more experienced operators but there is no reason why these can not be put into operation, they just require more work.</p>
<p>A SatNOGS ground station can be made in a variety of ways. The reference design uses a Raspberry Pi and RTL-SDR dongle with either stationary antennas, or a rotator (either a SatNOGS rotator or a commercial amateur radio rotator). It is also possible to use amateur radio transceivers or alternative SDR technology.</p>
+
<p>The reference design uses a Raspberry Pi 3 + RTL-SDR dongle + either a VHF or UHF antenna. A Raspberry Pi image is available to make software installation simpler. Much of the decision making is down to personal choice but sometimes additional hardware is needed to help filter out local noise, such as strong broadcast stations. Both the community and Matrix / IRC offer support and assistance.</p>
 
+
<p>[[File:SatNOGS_explanation.png|center]]</p>
<p>The image below illustrates the system:</p>
 
<p>[[File:Satnogs_imagemap.png|center]]</p>
 
 
<div style="border-radius: 3px; width: 16%; height: 400px; background-color: #f6f6f6; float: left; display: block; margin: 1.5%; border: 1px solid #A7D7F9; text-align: center; padding: 2.5%; padding-top: 0px;">
 
<div style="border-radius: 3px; width: 16%; height: 400px; background-color: #f6f6f6; float: left; display: block; margin: 1.5%; border: 1px solid #A7D7F9; text-align: center; padding: 2.5%; padding-top: 0px;">
__NOTOC__
+
<h2>What is SatNOGS?</h2>
<h2>What is SatNOGS</h2>
+
<p>[[Intro|Introduction to SatNOGS]]</p>
<p>[[Intro|Intro to SatNOGS]]</p>
+
<p>[[Ground Stations|What is a ground station?]]</p>
<p>[[Ground Stations|Intro to ground stations]]</p>
 
 
<p>[[Glossary]]</p>
 
<p>[[Glossary]]</p>
 
</div>
 
</div>

Revision as of 19:05, 6 October 2018

SatNOGS is an integral part of the Libre Space Foundation. The project aims to build a global network of satellite ground stations. Designed as an open source participatory project based on the users operating a ground station that is accessed via a web page for all of the network users. A basic ground station can be made up of commercial off the shelf components that are commonly available with a static through to more complex stations with multiple movable antennas.

If you would like to build your own ground station and have limited knowledge then it is recommended that you follow a non-rotator build with a simple RTL-SDR dongle and a Raspberry Pi. This will get you on to the network quickly and allow you to start scheduling observations. There are a few choices to be made but he community are available to help if you need it. More complex, movable, antenna systems can be steered with either the SatNOGS designed rotator or a commercial unit such as the Yaesu GS5500, Spid XY or similar. It is recommended that these types of builds are for more experienced operators but there is no reason why these can not be put into operation, they just require more work.

The reference design uses a Raspberry Pi 3 + RTL-SDR dongle + either a VHF or UHF antenna. A Raspberry Pi image is available to make software installation simpler. Much of the decision making is down to personal choice but sometimes additional hardware is needed to help filter out local noise, such as strong broadcast stations. Both the community and Matrix / IRC offer support and assistance.

SatNOGS explanation.png